APE Model 750u Hydraulic Impact Hammer

SPECIFICATIONS DATA
Maximum Rated Energy 750,000 ft-lbs / 847 Kj
Maximum Stroke 75 in/1905 mm
Minimum Stroke 6 in/152.4 mm
Blows per minute at minimum stroke 40 bpm
Blows per minute at maximum stroke 20 bpm
Total suspended weight with drive cap 280,000 lb / 127,006 kg
Ram Weight 120,000 lb / 54431.1 kg
Anvil (drive cap - standard) 90,000 lb / 40,860 kg
Pile Sleeve (standard) 12,000 lb / 5443.11 kg
Height overall of housing 421 in / 10,700 mm
Pile sleeve suitable for piles to O.D. up to 96 in / 2438 mm
Length excluding pile sleeve 313 in / 7944 mm
Length including pile sleeve (excluding ballast) 475.5 in / 12078 mm
Width see figure
Average operating pressure 4500 psi / 310 bar
Maximum oil flow 250 gpm / 946 lpm
Required drive power 990 hp / 738 kW

APE Model 1050 Power Unit

SPECIFICATIONS DATA
Power Unit Engine Caterpillar E-series C27 ACERT
Maximum Power 1050 hp (745kW)
Operating Speed 800 to 2100 rpm
Maximum Drive Pressure 5,000 psi (340 bar)
Drive Flow 0 to 321 gpm (1,219 lpm)
Clamp Pressure 4,800 psi (326 bar)
Clamp Pump Flow @ 2200 rpm 6.5 gpm (27 lpm)
Weight 27,000 lbs (12,247 kg)
Length 169 in (442 cm)
Width 82 in (208 cm)
Height 96 in (244 cm)