Facebook Icon YouTube Icon LinkedIn Icon Twitter Icon RSS Icon

Hydraulic Impact Hammer Specifications

APE Model 15-60 Hydraulic Impact Hammer

Maximum Rated Energy 150,000 ft-lbs
Maximum Stroke 60 in
Minimum Stroke 6 in
Minimum Energy 10,000 ft-lbs
Blows per minute at minimum stroke 60
Blows per minute at maximum stroke 28
Total suspended weight without drive cap 44,000 lbs
Drive cap Depends on pile type
Cusion Material Manufacturer Penn State
Cusion Material type Conbest and Aluminum
Cusion Material Diameter 25 in
Cusion Material Elastic-Modulus 285 kips per square inch
Cusion Material Thickness 5.5 inches
Operating height 17 ft
Overall width 37 in
Width for leads 32 in

APE Model 625 Power Unit

Power Unit Engine CAT 3408E DITA
Maximum Power 625 hp (466 kW)
Operating Speed 800 to 2100 rpm
Maximum Drive Pressure 4,500 psi (310 bar)
Maximum Hyd. Flow-Forward 0 to 190 gpm (779 lpm)
Maximum Hyd. Flow-Reverse 0 to 190 gpm (779 lpm)
Clamp Pressure 4,500 psi (310 bar)
Clamp Pump Flow @ 2200 rpm 10 gpm (38 lpm)
Weight 18,000 lbs (8165 kg)
Length 156 in (396.24 cm)
Width 70 in (179 cm)
Height 101 in (257 cm)
Fuel Capacity 145.4 gal (550 L)
Hydraulic Tank (main) 533.4 gal (2019 L)
Hydraulic Tank (reserve) 76.2 gal (288 L)

Click here to view Pilebuck's comprehensive hammer specs

Specifications may vary due to site conditions, specific hammer conditions or product set up. Specifications may change without notice.
Consult the factory for details on any specific product (800) 248-8498.

APE Partners GSA SmartPay Deef Foundations Institute Pile Driving Contractors Association IMECO Collins Company Internation Association of Foundation Drilling Terresolve Foundation Associates SEMW